The T Line is a 100V/70V/50V 2U chassis capable of
taking up to four 250W/500W/750W toroidal line transformers in any combination
and is for use with any other model in the T Series.
- Complementary class A/B bipolar outputs, using the unique MC2 current
driven floating drive stage, which gives one of the ‘cleanest’ sounds
available.
- Sophisticated monitoring of amplifier temperature and load conditions.
- Proprietary control and protection circuitry continuously checks
for all fault conditions such as shorted outputs, DC on outputs, excessive
temperature (blocked air flow), component failure etc… and disconnects
the outputs, if such an event occurs.
- Low noise vari-speed fans.
- ‘Side-chain’ clip limiter prevents speaker damage from clipped signals
but only comes into the signal path during limiting, and is inaudible
during normal operation.
- Audio ‘fade-up’ on Power-on.
- Optional internal crossover cards available.
- New proprietary ‘Ultra Cool’ heatsink.
- Full mains inrush protection.
|
- Rated power handling @ input impedance:
100V: 4 ohms
70V: 4 ohms
50V: 4 ohms
- Output impedance rated @
250W
100V: 40 ohms
70V: 19.6 ohms
50V: 10 ohms
- 500W
100V: 20 ohms
70V: 9.8 ohms
50V: 5 ohms
- 750W
100V: 13.3 ohms
70V: 6.5 ohms
50V: 3.3 ohms
- Frequency response: 50 Hz-16 kHz ± 1dB
- Distortion (THD): 50 Hz-16 kHz <0.03%
- Dimensions 2U (mm): 88 x 482 x 428
- Weight (each): T LINE chassis (only) 12kgs
250W transformer 2.3kgs
500W transformer 2.8kgs
750W transformer 4.4kgs
- Speakon inputs and outputs
|
