- 8/2/8 Mixer
- 8 Line Level Multi-Track Returns
- 8 into 2 Mix Bus with Pan
- 10 Segment input/mix LED meter
- 10 Segment gain reduction meter
- Headphone and speaker monitor out
- 8 channels in 1u rack space
- Link multiple units
- 48v Hi-voltage MicPre
- Threshold Limiter
- Direct Out
- Selectable 48v Phantom Power
The 8MX2 rack mount preamp/mixer is perfect for remote
recording, live broadcast feeds, studio "sidecar" inputs, and all critical
digital recording formats. |
- Frequency Response: +0/1 dB, 10Hz50kHz
- Gain Structure: 20dB headroom throughout
- THD: 0.008%, 20Hz20kHz, at +4dBm
- Clipping Level All Stages: +24dBm
- Total Voltage Gain: 65dB at channel out
- Hum and Noise: (20kHz Bandwidth)
132 dBm E.I.N. (shorted input)
129 dBm E.I.N. (150 ohm source)
86 dBm residual output noise
- Input Preamp/Trim Control:
Proprietary High Voltage Preamp
Adjustable Gain 065dB
single control (no pad required)
41 position detented level control
Constant Input Impedance: 4K ohms
THD 0.008% at all levels and gains
CMR >80 dB, no trimming required
Peak level display, 30 dB range
Phantom Power +48 volts
- Limiter: RMS Level Detection
- Threshold: +4dBm to +24dBm (out)
- Gain Reduction Display: 20 dB range
- Connectors:
- Mic Inputs : XLR 3 pin (pin 2 High)
- Mix Out, Monitor Out, and 2 Track Return: 1/4 in. (63mm) phone jacks
- Multitrack Inputs and Outputs: 2 multipin female DB25 connectors
- Multiple-unit connector: 2 multipin female D
- AC Input: Fused, Voltage
- AC Line cord: IEC typ,
- Dimensions:
1U, 1 3/4 x 19 in. (4
11 in. depth behind fro
- Weight: 7 Lbs. (3.2kg)
- Electrical Requirements: 100120/220240 V <60 watts
|
